Xkdrive ==> cross & scratchbox native
both….
0. toolchain path & source code
- toochain
path
/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3/arm-linux/arm-linux
- source code
20060215_aesop_Xkdrive_and_

sources_for_cross_and_scratchbox.tar.gz
- cross compiling make & make install tip
make DESTDIR=[rootfs의 /
directory] install
make prefix=[want to install directory from rootfs's /
directory] install
===================
ex>
if /korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3 is rootfs’s / directory,
Packages using DESTDIR, make
DESTDIR=/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3 install
Packages using
prefix, make DESTDIR=/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3 install
in case udev package
make
DESTDIR=/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3 install
in case zlib package
make install
prefix=/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3/arm-linux/arm-linux
Because /korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3 == aesop-2440a’s root
filesystem’s / directory,
and
/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3/arm-linux/arm-linux ==
aesop-2440a’s root filesystem’s /usr
directory(softlinked)
===============================================================================
1. libpng-1.2.8-config.tar.gz
- cross
CC=arm-linux-gcc AR=arm-linux-ar LD=arm-linux-ld
RANLIB=arm-linux-ranlib ./configure –build=i386-linux –host=arm
–target=arm-linux
–prefix=/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3/arm-linux/arm-linux
–without-x
// in slackware 10.1 version
./configure –build=i386-linux
–host=arm-linux –target=arm-linux
–prefix=/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3/arm-linux/arm-linux
–without-x
make
make install
- scratchbox or native compiler
./configure –prefix=/usr –without-x

2. tslib
2-1. tslib source
tslib_pubcvs.arm.linux.org.uk__20051122.tar.gz

2-2. configure
./autogen.sh
./configure –prefix=/usr –enable-shared
–enable-h3600 –enable-input –disable-corgi –disable-collie –disable-mk712
–disable-arctic2 –disable-ucb1x00 –build=i386-linux –host=arm-linux
after configure
vi config.h & fix below
//#define malloc rpl_malloc
make;make
prefix=/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3/arm-linux/arm-linux
install
==> Fix installed tslib.pc, package config’s file reference
path…
(because of –prefix=/usr for packaging in configure run, but install
to toolchain path)
2-3. tslib configuration setting in root filesystem
cd [root file system's
etc directory]
mkdir tslib
cd tslib

- in case Linux kernel 2.4.x
vi ts.conf-h3600-2.4
input below ======================
module_raw h3600
module pthres
pmin=1
module variance delta=30
module dejitter delta=100
module
linear
cd [root file system's etc directory]
insert below for kernel 2.4.x ======================
TSLIB_TSDEVICE=/dev/touchscreen/0raw
TSLIB_CONFFILE=/etc/tslib/ts.conf-h3600-2.4
export
TSLIB_TSDEVICE TSLIB_CONFFILE
- in case Linux kernel 2.6.x input device
vi ts.conf-h3600 (for kernel 2.6.x)
input below ======================
module_raw input
module pthres
pmin=1
module variance delta=30
module dejitter delta=100
module
linear
cd [root file system's etc directory]
insert below for kernel 2.6.x input device driver === (touchscreen driver is
/dev/input/event1)
TSLIB_TSDEVICE=/dev/input/event1
TSLIB_CONFFILE=/etc/tslib/ts.conf-h3600
export
TSLIB_TSDEVICE TSLIB_CONFFILE

3. Xkdrive compile
3-1. source
Xkdriver 2005.10.xx cvs version………^^
3-2. patch
※ see “051215-x-kdrive-start-crash-mouse-patch”(in korean…–;)
==>
patch…is done to source code
file(http://www.aesop-embedded.org/aesopX/

20060215_aesop_Xkdrive_and_sources_for_cross_and_scratchbox.tar.gz)
You extract source code. then, you see directory aesopX, ghclib,
xbaseapp
If you only run Xkdrive, just compile aesopX, ghclib directory’s
sources.
3-3 aesopX directory compile
X-kdrive base library & binary
cd aesopX
./xbuild.sh.arm9
./xbuild.sh.arm9_1
※ To know detail compile option, See build shell files.
3-3. run X server & touch screen
- tslib(for linux kernel 2.6.x input device) enabling & Xkdrive path
setting
vi /etc/profile
# /etc/profile: This file contains system-wide defaults used by
# all
Bourne (and related) shells.
TSLIB_TSDEVICE=/dev/input/event1
TSLIB_CONFFILE=/etc/tslib/ts.conf-h3600
export
TSLIB_TSDEVICE TSLIB_CONFFILE
# Set the values for some environment variables:
export HOSTNAME=”`cat
/etc/HOSTNAME`”
# Set the default system
$PATH:
PATH=”/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:”
# Set a default shell prompt:
#PS1=’u@h:w$ ‘
PS1=’aesop#
‘
PS2=’> ‘
export PATH PS1
# Default umask. A umask of 022 prevents new files from being created
group
# and world writable.
umask 022
alias l=’ls -al’
export PKG_CONFIG_PATH=”/usr/X11R6/lib/pkgconfig:/usr/lib/pkgconfig”
- run ts_calibrate
ts_calibrate
- run X server in manually
export DISPLAY=:0
Xfbdev -dpi 100 -br -pn :0 -noreset &
==> You see blank X windows & mouse pointer
3-4. ghclib directory compile
freetype & fontconfig…..etc libraries
compile
- compile stage 1(using shell script)
ghclib/lbuild.sh.arm_0
※ To know detail compile option, See build shell files.
- fontconfig compile manually
fontconfig-2.3.2 install howto
./configure –sysconfdir=/usr/etc –prefix=/usr –mandir=/usr/share/man
–disable-docs –host=arm-linux –build=i386-linux
make
make
DESTDIR=/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3 install
cd /korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3/usr/lib/pkgconfig
vi fontconfig.pc
change
to
prefix=/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3/arm-linux/arm-linux
cd /korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3/usr/lib
vi libfontconfig.la
change:
libdir=’/usr/lib’ ==>
libdir=’/korea-dokdo/aesoptool/gcc-3.3.4-glibc-2.3.3/arm-linux/arm-linux/lib’
- compile stage 2(using shell script)
ghclib/lbuild.sh.arm_1

4. font copy
4-1. font copy
aesop rootfs use x86(slackware 10.2) X windows font
cp -a “hosts’s /usr/lib/X11/fonts” “rootfs’s usr/lib/X11″
cp -a “hosts’s
/usr/share/fonts” “rootfs’s usr/share/fonts”
- font registration
After board booting,
fc-cache -f -v
then, confirm
fc-list

5. XKdrive native compiler using scratchbox

Related posts:

1. No package “xorg-server” found checking pkg-config is at least version 0.9.0… yes checking for...
2. rpl_malloc problem with cross compile Solution to this problem is to change rpl_malloc definition in...
3. Configuring CVS and CVSUP on Linux Installation of CVS and CVSUP Installing CVS on Redhat Linux...
4. Installing CVS CVS pserver allows source code to be retrieved and modified...
5. Disk Usage Information The CLI way The df utility displays the disk space...